Products
Standard Fast Assemble Container House
Speed is what sells this one. Patented folding hinge design, two people, no tools, full shelter in under an hour. Corrugated galvanized steel body, aluminum chequer plate floor — tough stuff. And it ships tight: 18 units per 20ft container. Ideal for emergency shelters, site huts, ticket booths, anywhere you need shelter on short notice.
Features
Product Description
The Standard Fast Assemble Container House is built entirely around speed. Two people can go from a folded bundle to a fully enclosed shelter in under an hour - no tools, no loose bolts, no measuring required.
The trick is a patented hinge-and-fold system. Floor, side walls and roof are all pre-connected with heavy-duty steel piano hinges. You unfold the walls outward, lift the roof into position, and lock the corner latches. That is basically it. For situations where you need shelter right now - disaster response, remote work sites, event setups - nothing beats how quick this thing goes up.
Product Details
Ready in Under an Hour
Two people, no special tools, fully set up in roughly 60 minutes.
Patented piano-hinge folding mechanism - floor, walls and roof stay connected the whole time.
Corner latches lock everything in place. No handfuls of loose hardware to sort through.
Tough Galvanized Steel Build
Walls are 0.6mm corrugated galvanized steel - rigid and handles abuse well.
Roof is 0.8mm steel sheet with a UV-resistant coating already applied.
Holds up to wind, rain and general rough handling better than fabric or tent alternatives.
Aluminum Chequer Plate Floor
3mm thick aluminum chequer plate welded to a steel subframe.
Rated for 500 kg evenly distributed load.
Non-slip surface, easy to hose down and keep clean. Good for muddy or dusty sites.
Removable Floor Thermal Mat
Comes with a roll-out thermal mat for the floor.
Walls and roof are uninsulated on this base model - best for temperate climates or short-term use.
An optional insulation liner is available if you need it for colder conditions.
Door and Ventilation Windows
One 1.2m wide sliding door for easy access.
Two small louvered windows with mesh screens - lets air flow through while keeping bugs out.
Good basic cross-ventilation for warmer days.
Basic Pre-Wired Electric
One LED ceiling light and one double power outlet come pre-installed.
Runs off an external 16A inlet on the outside wall.
Power cable is not included - you supply your own extension cord from generator or mains.
Ultra-Compact for Shipping
Folds down to just 2.2m × 2.2m × 0.4m thick.
Up to 18 units fit inside a single 20ft shipping container.
Folded weight is only 180 kg - two people can lift one onto a pickup truck without a forklift.
Simple Ground Anchoring
Four earth augers are included - screw them into the ground and the unit stays put.
Can also be bolted to a concrete slab using the pre-drilled holes in the base frame.
Flexible enough for grass, dirt or paved sites.
Common Use Cases
The Standard Fast Assemble Container House shines anywhere speed and simplicity matter most:
- Emergency disaster relief shelters
- Military forward operating bases
- Event ticketing and info booths
- Farming and agricultural field shelters
- Temporary construction site shacks
Available Add-Ons
Sunshade awning for extra covered space outside the door.
Full interior insulation liner for colder climates.
12V solar lighting kit for off-grid locations.
If you need shelter instantly at the lowest possible cost, this model is hard to beat. Disaster response teams around the world keep coming back to it because it just works, every time.
Product Parameters
|
Item |
Specification |
Notes |
|
Deployed dimensions |
3000 × 3000 × 2500 mm |
9 sqm usable floor area |
|
Folded dimensions |
2200 × 2200 × 400 mm |
Ultra-compact for shipping |
|
Folded weight |
180 kg |
Two-person lift |
|
Assembly time |
~60 minutes, 2 people |
No tools required |
|
Wall material |
0.6mm corrugated galvanized steel |
|
|
Roof material |
0.8mm steel sheet, UV-coated |
|
|
Floor material |
3mm aluminum chequer plate + steel subframe |
500 kg uniform load |
|
Insulation |
Removable floor thermal mat |
Walls/roof uninsulated on base model |
|
Door |
1.2m sliding door |
|
|
Windows |
2 × louvered windows with mesh screens |
|
|
Electrical |
1 LED light + 1 double outlet + 16A external inlet |
Power cable not included |
|
Container loading |
18 units per 20ft container |
|
|
Anchoring |
4 earth augers included; or bolt to concrete |
Pre-drilled base frame holes |
|
Assembly mechanism |
Patented piano hinge & fold system |
Corner latches, no loose fasteners |
|
Optional accessories |
Sunshade awning, insulation liner, 12V solar lighting kit |
Customer Cases
Disaster response organizations are some of our steadiest buyers for this model. When an earthquake or flood hits, they need shelter on site the same day - and folding tents just do not hold up in heavy rain or wind the way steel does. One international relief agency keeps a stock of these pre-positioned in warehouses across three continents, ready to ship at a moment notice.
Construction companies also use them as quick site offices and tool sheds. Since you do not need a forklift or special equipment to unload them, they work on remote sites where access is limited. Event organizers pick them up for ticket booths and first-aid stations too - set up in the morning, taken down after the event, and everything fits back on one truck.
How are they transported and installed?
The Standard Fast Assemble Container House travels folded flat and takes up very little space. Eighteen units stack inside a standard 20ft container, so shipping costs per unit are low. At only 180 kg folded, most sites can unload them with just two people - no crane or forklift needed.
Installation is straightforward. Pick a reasonably level spot, unfold the side walls outward, lift the roof panels up, and lock the four corner latches. Screw in the four included earth augers to hold it down, or bolt it to a concrete slab if you have one. The whole process takes roughly an hour for two people, and you do not need any tools beyond what comes in the package.
Because there are almost no separate parts and nothing to assemble piece by piece, it is very hard to get wrong. That is a big reason it works so well for emergency deployments where crews might be working under pressure.
Why Choose Us?
We designed this model specifically for situations where speed and reliability matter more than anything else. The hinge mechanism is patented and tested - not a cheap copy that binds or breaks after a couple of deployments. The steel gauge is what we say it is, no shaving fractions of a millimeter to save cost.
Come by the factory if you can. Watch one go from folded to fully set up in real time, try the latches yourself, and check the welds on the subframe. We think you will notice the difference versus lower-priced alternatives.
A few quick facts:
- Most distributors place an order right after their factory visit
- High repeat order rate from relief and construction clients
- 46,000 sqm production facility
- Annual capacity around 3,000 units across all models
FAQ
Contact Us
Let us know your quantity and what you plan to use them for - we will send over a detailed quote and full spec sheet. Bulk pricing available for larger orders.
Email: Linda@tscontainerhouse.com
WhatsApp / WeChat: +8618331553075
Hot Tags: standard fast assemble container house, China standard fast assemble container house manufacturers, suppliers, factory, fast assemble container house, Fast Assemble Container House with Balcony, Luxury Fast Assemble Container House, Prefabricated Fast Assemble Container House, Stackable Fast Assemble Container House, Standard Fast Assemble Container House
No Information
You Might Also Like
Send Inquiry
