Packing Box Installation Guide

Preparation Before Installation: Before installing the packing box, the following preparations will make the process smoother:

1. Tool Check: Ensure you have basic tools such as screwdrivers, wrenches, and a level.

2. Site Cleanup: The installation area must be flat and free of debris to prevent the box from tilting.

3. Component Check: After unpacking, check all accessories to avoid omissions.

4. Protective Measures: Wearing gloves is recommended to prevent scratches.

Detailed Assembly Steps: Assemble the packing box in sequence to avoid rework:

1. Base Plate Fixing: Lay the base plate flat and fix the four corners with screws.

2. Side Panel Installation: Install the front, back, left, and right side panels in sequence, paying attention to aligning the slots.

3. Top Plate Cover: Install the top plate last, ensuring a tight fit around the edges.

4. Overall Reinforcement: Check all connections and add additional screws if necessary.

Post-Installation Inspection and Adjustment: After installation, these details determine the user experience:

* Door Lock Test: Open and close the door repeatedly 3-5 times to confirm smooth operation without jamming.

* Waterproofing test: Spray a small amount of water at the seams to test the seal.

* Load-bearing test: Place an appropriate weight and observe whether the cabinet deforms.

* Movement test: Push the cabinet to confirm that the casters or legs are working properly.